We understand the the resurfacing of a pool is a major investment, so California’s Gunite & Pool Plastering recommends the following care be done in order to protect your new pool finish and give you years of enjoyment.

First 30 Days:

BRUSH all sidewalls and floors daily with pool brush.
VACUUM pool floor daily.
CLEAN FILTER jet with hose daily after vacuum.
MAINTAIN proper water balance - PH 7.2 and Alkalinity 80ppm or below.
MAINTAIN water level to middle of tile.

30 to 60 Days:

BRUSH all sidewalls and floors 3 times per week with pool brush.
VACUUM pool same day as brushing.
CLEAN FILTER jet with hose after vacuum.
MAINTAIN proper water balance - PH 7.4 to 7.6 and Alkalinity 80 to 100ppm.
MAINTAIN water level to middle of tile.

After 60 Days:

BRUSH all sidewalls and floors weekly.
VACUUM pool floor weekly.
CLEAN FILTER jet with hose daily after vacuum weekly.
MAINTAIN proper water balance - IDEAL LEVELS PH 7.2 to 7.6, Alkalinity 80 to 100ppm, Calcium Hardness 200 to 400ppm, Stabilizer (cyanuric acid) 30 to 50ppm and Sanitizer (free chlorine) 1 to 3ppm.
"ALWAYS" maintain water level at the middle of tile in order to avoid damage to the pool equipment.

NOTE: Always check for leaks around the pool equipment area. If any, please turn the valve to the main drain only position, refill pool and contact a pool care service for repair.

You may wish to hire a reliable pool service to help you maintain your pool, however you will also need to apply proper care.